LotWon

Reply #11

RJOh — Fri, 14 Jan 2005 22:13:50 GMT

Quote: Originally posted by xavier102772 on January 14, 2005I wonder if anybody has any ideas as to a consistent way to get all 6 winners in a field of 18 out of the 49 numbers in the draw. I'm sure if that was possible only 50% of the time, there would be someone willing to play all 18,564 lines every draw.RJOh

Reply #10

xavier102772 — Fri, 14 Jan 2005 19:04:20 GMT

Zulu, when you purge down the 18 number wheel with the 6 filters, approximately how many numbers are you usually left with to play? Also, has anybody given you any insight on how to consistently pick 18 numbers that contain the 6 winners? I emailed Ion with any suggestions he might have. I wonder if anybody has any ideas as to a consistent way to get all 6 winners in a field of 18 out of the 49 numbers in the draw. Even 10-20% of the time would be nice. In Ion's software using MDIeditor I c... [ More ]

Reply #9

Zulu — Sun, 02 Jan 2005 17:53:13 GMT

the best way to see how the filters operate is is to create a full wheel of 18 numbers. Type in numbers 1 to 18 into a file. then use the Break faciility in Util6exe to construct the full wheel. Make sure the numbers have the winning numbers from the previous draw. Do the statistical reporting for all your D6 files. Delete the top combination from each D6 file..Go through the statistical reports and note the settings(4 above or 4 below the median). Set up some St6 files and put in the filter set... [ More ]

Reply #8

paragon — Fri, 31 Dec 2004 12:43:04 GMT

zulu i want your help on using the lotowon 632. How can i choose the right filters when make the statistical reports? I mean is there a specific way to choose a filter value to play or your study the filter and set its value based on the median of the filter?thanks

Reply #7

Zulu — Tue, 28 Dec 2004 07:15:28 GMT

I have no experience of the Pick 3 digit draws as they are not available in the UK although I have looked at them. In Saliu's Pick 3 Lotwon you are using 7 layers. I would assume you could create multiple D3 files so as to find favourable filter settings and then Purge them down to just a few combinations.

Reply #6

xavier102772 — Mon, 27 Dec 2004 22:29:58 GMT

Zulu, that's a great strategy. I'm definately gonna try that with the Canadian 6-49. Thanks. I've been working with pick332(lotwon3) mostly lately. A strategy that I've been working on/with is setting max values for each filter by analyzing draws following trigger draws. Trigger draws such as 123, 135....two numbers that repeat. After which I'll analyze the draws in excel by using the standard deviation, the median and the max value of the filter. So I'll run super3.exe, look through the... [ More ]

Reply #5

Zulu — Mon, 27 Dec 2004 17:50:35 GMT

I work with only one lottery that is the UK 6/49. Let me explain what I do. I have a data-6 file with the real drawings updated every draw. I create at least 15 simulated D6 files i.e D6a, D6b, D6c .... D6o. At the top you paste the Data-6 file. After every draw each file is updated. For each D6 file you run a W6 report. ie a D6a file will have a 4 layer report namely a1 a2 a3 a4. D6b will have b1 b2 b3 b4 and so on. So with 15 D6 files you will have 60 reports giving you 60 layers(dimensions).

Reply #4

foxy — Mon, 27 Dec 2004 15:24:27 GMT

I looked through my W6 files. You are right; most filters which are median x 4 (or / 4) reverse in the next drawing. I dont quite understand what the purpose of multiple D6 files is. Do you mean that you work with multiple lotteries

Reply #3

Zulu — Mon, 27 Dec 2004 07:03:27 GMT

I use Lotwon632 which is more powerful than Mdied because you have many different layers. What I do is create multiple D6 files. At the moment I use 15 D6 files. I search the files and note which filters apear 4 times above and below the median. A filter in this category has a 95% chance of reversing either below or above the median. These filters are noted down. Start with Lotto632 combination generating program and then afterwards Purge with Power632 until you are down to a few combinations to... [ More ]

Reply #2

otto — Thu, 23 Dec 2004 22:50:09 GMT

I meant LotWon6, sorry. Ive been working with both Pick632 and MDIE for the last while. In fact, I have won a little money using MDIE; not using recommended methods however, but rather using FFG as a foundation. I think I have read everything there is to read about both packages (including all the abandoned forums), though it seems like every time I go back to the material I find something Ive missed...Thanks for the offer to help with strategies! Thats probably what I need most help with :-). I... [ More ]

Reply #1

xavier102772 — Thu, 23 Dec 2004 18:35:01 GMT

Which Lotwon? Lotwon3(Pick332) or Lotwon6(Pick632)? I have used both pretty extensively. Also, if you read the tutor.doc that comes with each package as well as the specific .txt in each you should be ok. The tutor.doc plus all the posts on Ion's site should be more than enough to help you select good filters and make some basic strategies. If anything you will be abl to get some very good ideas on what kinds of strategies you can develop. If not, let me know and I'll try to help you out.... [ More ]

LotWon

otto — Thu, 16 Dec 2004 21:47:01 GMT

Does anyone have any tips on selecting filter values in LotWon? There is hardly any advice on how to do it on saliu.com and very little in the documentation.Does anyone use this system?Thanks!otto