Free Program - Pick 3 wheeling-engine

Reply #27

paurths — Sat, 08 Apr 2006 21:57:47 GMT

New version which includes a Width -filter is now available for download: 696

Reply #26

paurths — Sat, 08 Apr 2006 19:45:21 GMT

Hi, for anyone who might be interested, there now also is a free wheeling engine for pick4 available: https://www.lotterypost.com/threads132128p1.htm

Grtz,

Ricky

Reply #25

paurths — Sat, 08 Apr 2006 07:20:36 GMT

one can also tryout LotSoft, the full program in which this wheeling engine is included (and soon a much bigger one), too...

Reply #24

BobP — Sat, 08 Apr 2006 05:25:10 GMT

All software can do is automate a process you are already doing. For example a workout that takes you all day could be done in seconds if you can provide the percise steps you take to get to the result that wins often enough to keep you in profit.

Otherwise if you make choices at various stages the software will just be another tool for people to try to get lucky with.

I went through this a couple of times and eventually found software that was already doing what I thought would prove p... [ More ]

Reply #23

DIAMOND RAY — Sat, 08 Apr 2006 02:48:11 GMT

Can anyone tell how I can build a lottery program or where to go to start I think I have a plan

Reply #22

truecritic — Sat, 08 Apr 2006 02:02:01 GMT

Good work, Ricky!

I particularly like the positional choices and the inclusion of doubles/triples.

Reply #21

sfilippo — Fri, 07 Apr 2006 21:47:37 GMT

Hey paurths,

Thanks for the free program. I'm sure it's going to come in very handy

Reply #20

LANTERN — Fri, 07 Apr 2006 21:28:11 GMT

Take the 382 Low-High-Low or LHL most people use this filter pattern in only this way, I have discovered other ways in which to use this and other filter patterns for even greater filtering and or accuracy.

There are no less than 4 ways perhaps in which this particular filter pattern can be used as an exclude filter. The known way and 3 more ways maybe even more than 3.

Of course not all of them ways are to be used at the very same time, only the one or ones that will work best at the part... [ More ]

Reply #19

LANTERN — Fri, 07 Apr 2006 21:15:46 GMT

CD as you know these are just some very good filters among a legion of them, there are many ways or dimentions in which filters can be used, many of them are on a sort of mixed or compound filtering, of which I have said very little so far, but I won't talk about that here at this time.

You might say that there are filters within filters sort of or kind of.

Reply #18

LANTERN — Fri, 07 Apr 2006 21:10:47 GMT

So for doubles each of the six patterns filters out only 45 straight double combos, while each of the singles patterns filters out 120 singles straight combos.

Reply #17

LANTERN — Fri, 07 Apr 2006 21:08:12 GMT

The filter is the Lower than-Medium-Higher than.

They are in relation to which of them Higher than and which-one is Lower than and which is Medium or in between the Highest and the Lowest of them.

They are relative terms.

Reply #16

LANTERN — Fri, 07 Apr 2006 21:05:02 GMT

But i did make a mistake, doubles are 3 way combos, but OVERALL in a way they also are 6 way combos such as these:

044 LHH

440 HHL

404 HLH

And:

400 HLL

004 LLH

040 LHL

So there are 6 patterns for doubles also, 3 for Half (135) of the doubles and 3 for the other half (135) of them. For a total of 270 straight doubles.

Reply #15

LANTERN — Fri, 07 Apr 2006 20:59:02 GMT

CD Not Low and or High, but Lower than and Higher than.

4 = Higher than 0 and 0 = Lower than 4.

Reply #14

tww24 — Fri, 07 Apr 2006 20:55:06 GMT

Ricky

I have tried both ,, Windows XP

Thanks for the help

Reply #13

paurths — Fri, 07 Apr 2006 20:30:18 GMT

Quote: Originally posted by tww24 on April 7, 2006 Quote: Originally posted by paurths on April 7, 2006 you're all quite welcome,

i hope it helps some people creating their numbers/series

enjoy

grtz,

Ricky

Ricky, I keep getting an error message that says,

componet tabctl32.ocx or one of its dependencies not currently registered

OR freewheel.exe not a valid WIN32 application. Any ideas or suggestions would be greatly appreciated.

Thanks for all of your fine work.

Reply #12

CalifDude — Fri, 07 Apr 2006 20:26:11 GMT

Quote: Originally posted by LANTERN on April 7, 2006 Highest-Lowest for doubles.

044 LHH

440 HLL

404 HLH

3 Patterns for doubles each hold 90 straight combos.

You consider zero as a low number ... I agree ... but 4 is a high number?????? I have never seen that before. What are your low digits and your high digits?

Also, how is 440 a HLL??

I am sure I am missing something here

Reply #11

LANTERN — Fri, 07 Apr 2006 20:19:00 GMT

Highest-Lowest for doubles.

044 LHH

440 HLL

404 HLH

3 Patterns for doubles each hold 90 straight combos.

Reply #10

tww24 — Fri, 07 Apr 2006 19:58:51 GMT

Ricky, I keep getting an error message that says,

componet tabctl32.ocx or one of its dependencies not currently registered

OR freewheel.exe not a valid WIN32 application. Any ideas or suggestions would be greatly appreciated.

Thanks for all of your fine work.

Reply #9

LANTERN — Fri, 07 Apr 2006 19:53:11 GMT

If those things were added I could then start to use it to make predictions on the pick 3 forum.

Besides the width filters only pairs manipulations might be really needed, perhaps mostly EXCLUDE pairs, boxed (Any Position) and straight by position.

I almost forgot, the EXCLUDE Highest-Medium-Lowest digits position filter for straight would greatly help reduce straight combos.

839=Medium-Lowest-Highest or MLH

255 = Lowest-Highest-Highest or LHH

258 = Lowest-Medium-Highest or LMH

Reply #8

paurths — Fri, 07 Apr 2006 18:01:51 GMT

you're all quite welcome,

i hope it helps some people creating their numbers/series

enjoy

grtz,

Ricky

Reply #7

Best Picks — Fri, 07 Apr 2006 16:34:56 GMT

thanks paurths

Reply #6

ducksafloat — Fri, 07 Apr 2006 16:04:54 GMT

hi paurths,

now this was way cool, no hinting, nor beating around the bush, straight up sharing information. thank you

Reply #5

LANTERN — Fri, 07 Apr 2006 15:35:36 GMT

By the way, with the addition of the width difference filter it would be very much easier to reduce boxed and or straight combos.

Those are the standard basic filters, what your wheeler has and also the width filter.

Reply #4

cps10 — Fri, 07 Apr 2006 15:35:05 GMT

Ricky

Outstanding...thanks a lot

Reply #3

LANTERN — Fri, 07 Apr 2006 15:31:42 GMT

Ricky

Thank you very much.

As these wheels go it might need just one more filter to be a Standard filtered wheeler.

The pick 3 lenght or width difference filter.

That is, the difference in digits from lowest to highest digits.

Like, 836 = 3 to 8 = 5 pick 3 width or lenght. 3 being the lowest digit and 8 being the highest.

That one filter would make the wheeler complete or a standard filtered wheeler.

Then it would be just as good or even better than many other wheelers out... [ More ]

Reply #2

CARBOB — Fri, 07 Apr 2006 12:53:21 GMT

Thanks Ricky.

Bob

Reply #1

paurths — Fri, 07 Apr 2006 11:43:05 GMT

The link for the setup package holds https://www.lotterypost.com/ in it, which ofcourse is not correct

this is the good one: here (5 MB

Free Program - Pick 3 wheeling-engine

paurths — Fri, 07 Apr 2006 11:01:07 GMT

Hi all,

Here's a free wheeling eninge for pick3, for straight and boxed numbers.

There are 2 ways of selection for digits;

- any position: for boxed numbers

- positional: for straight numbers

You can filter out several patterns such as Highlow, Oddeven, shortsum, root and sumdigits

If you want to select all items in a list, just click it with the right mousebutton and select Select all from the popup menu. (you can also de-select all the items in the list using the same way... [ More ]