Anyone uses Printer to print Playslips? please help

Reply #6

tntea — Sat, 17 May 2008 14:32:18 GMT

We were told we couldn't print computer generated tickets at the store where I worked.

Reply #5

LottoLuthor — Sat, 17 May 2008 01:49:07 GMT

Perhaps it would help to know that your LottoPro betslip definition files are actually coded in such a manner as to represent the entire image of your particular playslip.Imagine that you have taken a picture of one of your playslips and you have the photograph negative in your hand(actually it's in the printer memory) and you are trying to align the negative over the actual playslip so that all the little boxes and lines match exactly to the playslip boxes and lines.You do this very same thing... [ More ]

Reply #4

dreamer23 — Fri, 16 May 2008 21:53:19 GMT

Thank you for your responses, I guess I have to get back to you with more details.

Reply #3

CARBOB — Fri, 16 May 2008 11:36:51 GMT

I use Lottopro, not the same version as yours. I don't have those playslips, but maybe this will help. I had to adjust the settings for my Cash 3 Play 4. Make sure the playslips are inserted lengthwise( all the way to the right) with first panel pointing inward. Set printer to portrait. In Lottopro, goto edit betslip properties, click test. If adjustment is needed, adjust 1 setting at-a-time. I hope this helps.

Reply #2

LottoVantage — Fri, 16 May 2008 03:45:48 GMT

I use an HP OfficeJet All-In-One 4300 Series Ink Jet printer and have never had a problem. I also use Lotto Pro to wheel my tickets and have never adjusted the printer properties.

It could possibly be the play slips you are using.

Reply #1

LottoLuthor — Fri, 16 May 2008 03:26:58 GMT

Get a grip dreamer23 I suspect you just need to take another look at your printed playslip and describe it in detail so that I can guide you thru the correct steps to successful playslip printing. So do this,1. printout one more playslip2. determine that the left margin alignment is correct or not. If not you may have to use a 5/16 by 1/2 balsa wood wedge to get it to line up correctly.(buy it at your local Hobby shop). Cut off a piece about 7.5 long and insert it on the right hand side of your

Anyone uses Printer to print Playslips? please help

dreamer23 — Fri, 16 May 2008 03:07:50 GMT

I have been trying unsuccessfully to print directly on Maryland Mega Millions and DC Powerball Playslips. I use Lotto Pro 2008 and I have an HP inkjet printer.

The output on playslips is not properly aligned after printing. I have downloaded Bet Slip Definition files from Lotto pro website (windowslotto) and I have tried to modify their settings and but still can't get anywhere.

Do you recommend using any particular PRINTER? Do you I need to modify the printer properties? I just feel that... [ More ]