Here is a free software that can make the VTrac conversions easier to do:
http://dropcanvas.com/#z6Koj75v7pL25G
I uploaded the zip file there, it is easy enough to use and mostly because I myself already made the replace "ARGUMENT" that is needed for it to work.
You just need to load the argument that I made (VTrac Argument) into the software and press the "Replace" option, first one time to replace the 0 to 9 digits to a to e and then to replace a to e to 1 to 5 VTracs.
It is easy enough, everything that you need is in the zip folder that you can download.
The a.txt file is a sample file that has this: I just noticed that I had already made the conversions (two conversions as I showed before) on it.
So never mind those numbers just enter there your own numbers as needed.
143
341
133
234
154
521
315
425
So you can use that with the software and see how it works.
This: AF9 Picture 1.jpg is an image of the software that I made, look at it, the "Argument" that you need is already loaded into the program there.
The help.txt is the help file of the software, look at it, but you should not need to.
--------------------
First:
Download the zip file to your desktop (C:\Documents and Settings\Administrator\Desktop\AF9 Picture 1) (WinXP or whatever), then unzip it (Rth Click on the mouse to see the UnZip Option), then open the "AF9 Picture 1" folder, than Install "af9v12.exe", then open it (it will not put an icon on the desktop so first look for it), once it is open where it says "File" on the lower half of the software drag there the "a.txt" file on it, then go to the other "File" that is on the Lth upper corner of the software and Lth Click on "Load Arguments" find the "VTrac Argument" file that I made and sent and Load it into the software, now on the Rth Upper portion of the software Lth Click on "Replace" and that will perform the 1st conversion from 0 to 9 digits to a to e, now Click again on the same "Replace" and it will now convert the a to 4 into the 1 to 5 Vtracs.
And that is all.
In the future just put your pick 3 and or pick 4 numbers or whatever into the a.txt file and make the convertions, make sure that the "VTrac Argument" argument is loaded first and that you have put the a.txt file onto the software (the lower half of the software).
Now open the a.txt file with Notepad or whatever and you will see that the convertions were made.
Finito!
Any questions?
The download might be good only for some time, maybe for a week, I am not sure.
I tried the download and it works fine.
It is getting very hard to find good file sharing services on the internet.