For those who are not sure how the wheel works here are the instructions.
First it's a dual wheel. It will filter the sets located in the draw-file when the
[Filt] button is pressed or if the [Full] button is pressed it generates all lines
from 000 to 999 for pick-3 or 0000 to 9999 for pick-4 and passes them
through the filter.
How the filter works. The digits loaded into the cells determine which sets will
pass and which sets will be rejected. Lets say that we load the position-1 cell
with digits 123. The filter will only pass lines who's first digit is 1, 2 or 3, If a cell
is not populated then that position is ignored.
To enter digits into a cell, first click anywhere within the cell. The cells are
in order from position-1, first digit in line/set on top to last position of the
set/line on the bottom. Once a cell is clicked the border will highlight in
green. It is now ready to accept the digits you want to play in that position.
Left click the digit keys to add a digit to the cell or R-click to remove it if you
made a mistake. You cannot add or remove digits from a cell using the digit
keys unless the cell is active. To clear all cells click the [Clear] button.
Once you have populated the cells then click the [Filt] or [Full] button depending
on which type wheel meets your needs. The program will run and then return to
the main menu. you will see the number of lines that passed the filter in the lower
right of the main program window. Press the [Close] button to close the wheel.
Note! You can use the Slots to help select positional digits to use in the wheel.
I do not know how to determine the correct digits to play day to day using the
slots. I think OMJ or others can maybe help out with that.
RL