Pick 3 Reduction System with HOLD featurePrev Topic Next Topic

New Topic New Poll

AboveAverage22

us
Member #224,590
August 25, 2022
20 Posts
Offline

Aug 28, 2023, 8:33 am

Hello, I'm curious if there is anyone out there who can make this Pick 3 reduction tool system. What this system would need is an empty pool with a button that would put the 1000 numbers, 000-999 into the pool. 0 - 9 in each 3 positions with checkmark boxes by each number. And then a HOLD feature. Here is an example of the purpose of the HOLD feature. Let's say in the first position I have checkmarked 2 4 and 7, in the 2nd position 4 5 8 and 9 checkmarked and in the 3rd position 2 and 7 checkmarked. I would want the hold feature to have the options of 1 2 and 3 with checkmark boxes next to each number. 1 would mean I want to see every single result in the pool of 1000 numbers that has AT LEAST 1 of the positional numbers I have checkmarked. If I have the number 2 checkmarked, that means I want to see every single result in the pool of 1000 numbers that has AT LEAST 2 of my positional checkmarked numbers. And of course if 3 is checkmarked then I only want to see results from the pool of 1000 numbers that has ONLY all my positional checkmarked numbers. Then when the results show up, I would be able to copy the results and paste them into the pool and start the same process again of checkmarking positional numbers, just with a smaller pool this time, instead of 1000 numbers, and basically just repeat that process over and over until I have the set amount of combinations I'd like to use. The HOLD feature is what makes this different from other reduction systems I've seen online. If anyone out there could make this it would be a blessing! Some people I've talked to about it say it sounds pretty simple to make and could probably be done in less than an hour.
Todd

50

Chief Bottle Washer

New Jersey
United States
Member #1
May 31, 2000
27,941 Posts
Online

Aug 28, 2023, 10:44 am

<Moved to Pick 3 forum>

Please post in the appropriate forum ... thank you.

The Systems forum is for describing systems, not for requesting them.
Mr-B 216

Ohio
United States
Member #179,976
February 15, 2017
1,283 Posts
Offline

Aug 28, 2023, 8:14 pm

Quote: Originally posted by AboveAverage22 on Aug 28, 2023
Hello, I'm curious if there is anyone out there who can make this Pick 3 reduction tool system. What this system would need is an empty pool with a button that would put the 1000 numbers, 000-999 into the pool. 0 - 9 in each 3 positions with checkmark boxes by each number. And then a HOLD feature. Here is an example of the purpose of the HOLD feature. Let's say in the first position I have checkmarked 2 4 and 7, in the 2nd position 4 5 8 and 9 checkmarked and in the 3rd position 2 and 7 checkmarked. I would want the hold feature to have the options of 1 2 and 3 with checkmark boxes next to each number. 1 would mean I want to see every single result in the pool of 1000 numbers that has AT LEAST 1 of the positional numbers I have checkmarked. If I have the number 2 checkmarked, that means I want to see every single result in the pool of 1000 numbers that has AT LEAST 2 of my positional checkmarked numbers. And of course if 3 is checkmarked then I only want to see results from the pool of 1000 numbers that has ONLY all my positional checkmarked numbers. Then when the results show up, I would be able to copy the results and paste them into the pool and start the same process again of checkmarking positional numbers, just with a smaller pool this time, instead of 1000 numbers, and basically just repeat that process over and over until I have the set amount of combinations I'd like to use. The HOLD feature is what makes this different from other reduction systems I've seen online. If anyone out there could make this it would be a blessing! Some people I've talked to about it say it sounds pretty simple to make and could probably be done in less than an hour.

See if this is what you are looking for.

What goes around comes around.
AboveAverage22

us
Member #224,590
August 25, 2022
20 Posts
Offline

Aug 28, 2023, 9:50 pm

Wow! That is <snip> near what I'm looking for! The ONLY thing it doesn't do is, once I get my results anx hit copy and my results go into the pool...when I checkmark new numbers, I wish it would extract from my NEW pool instead of the original 000-999 pool. However, I really appreciate you sharing this! It can still probably be of some use :) Did you build this yourself?

This post has been automatically changed by the Lottery Post computer system to remove inappropriate content and/or spam.
Mr-B 216

Ohio
United States
Member #179,976
February 15, 2017
1,283 Posts
Offline

Aug 28, 2023, 10:14 pm

Quote: Originally posted by AboveAverage22 on Aug 28, 2023
Wow! That is <snip> near what I'm looking for! The ONLY thing it doesn't do is, once I get my results anx hit copy and my results go into the pool...when I checkmark new numbers, I wish it would extract from my NEW pool instead of the original 000-999 pool. However, I really appreciate you sharing this! It can still probably be of some use :) Did you build this yourself?

This post has been automatically changed by the Lottery Post computer system to remove inappropriate content and/or spam.

"I wish it would extract from my NEW pool instead of the original 000-999 pool. "

Hmmm, that's how it works for me here. Not sure what's going wrong on your side. I'll take a look and see if I can find the problem.

I select my Holds 1 thru 3, and check the digits for each.

I click Show Me, and the results are displayed to the right.

After I click copy, the pool list on the left is filled with the results from the list on the right.

I then check new Hold digits, click Show Me, and the new results appear in the list to the right. Only numbers that were obtained from the previous run are in the pool.

"Did you build this yourself? "

Yes I did. I usually create .exe files, but decided to try something new for this.

What goes around comes around.
AboveAverage22

us
Member #224,590
August 25, 2022
20 Posts
Offline

Aug 28, 2023, 10:35 pm

"Only numbers that were obtained from the previous run are in the pool."

That's the part that doesn't work for me. After I click show me to get my results and click COPY and my results go into the pool on the right, I select new hold numbers. When I click SHOW ME for the 2nd time, it still shows me results from the original pool of 000-999 instead of just from the new pool with my 1st results in it.

That's awesome you built this! It's such a simple tool that can be of great use to shave off numbers if you use enough systems!
Mr-B 216

Ohio
United States
Member #179,976
February 15, 2017
1,283 Posts
Offline

Aug 28, 2023, 10:43 pm

Quote: Originally posted by AboveAverage22 on Aug 28, 2023
"Only numbers that were obtained from the previous run are in the pool."

That's the part that doesn't work for me. After I click show me to get my results and click COPY and my results go into the pool on the right, I select new hold numbers. When I click SHOW ME for the 2nd time, it still shows me results from the original pool of 000-999 instead of just from the new pool with my 1st results in it.

That's awesome you built this! It's such a simple tool that can be of great use to shave off numbers if you use enough systems!

I think I found the problem. I may not get it fixed tonight. If not, I'll get to it in the morning.

What goes around comes around.
AboveAverage22

us
Member #224,590
August 25, 2022
20 Posts
Offline

Aug 28, 2023, 10:51 pm

If you just built this today I'm very impressed! And if you built it because of my request, I literally can not thank you enough! I hope that it will be a great use to you as well! Like I said, it's a great tool to shave off numbers if you have enough systems! There's a good amount of systems I use that gives me at least 1 correct number say out of 6 instead of 10. There's some systems I use that will give me 2 correct numbers out of 7. So after enough systems you can get 1000 numbers reduced down to like 50 lol. That's why the HOLD feature is a great feature to have! No worries about when you can fix that, I'm just grateful that you built this! Thank you thank you!
Mr-B 216

Ohio
United States
Member #179,976
February 15, 2017
1,283 Posts
Offline

Aug 28, 2023, 11:04 pm

Quote: Originally posted by AboveAverage22 on Aug 28, 2023
If you just built this today I'm very impressed! And if you built it because of my request, I literally can not thank you enough! I hope that it will be a great use to you as well! Like I said, it's a great tool to shave off numbers if you have enough systems! There's a good amount of systems I use that gives me at least 1 correct number say out of 6 instead of 10. There's some systems I use that will give me 2 correct numbers out of 7. So after enough systems you can get 1000 numbers reduced down to like 50 lol. That's why the HOLD feature is a great feature to have! No worries about when you can fix that, I'm just grateful that you built this! Thank you thank you!

You're very welcome! I had some free time earlier today and I wanted to try out the new app creation software, so it worked out for both of us.

If you reload the app (Ctrl + F5) on Windows browsers, you should see the updated version. You just have to make sure the previous version is not in your browser cache. Let me know.

What goes around comes around.
AboveAverage22

us
Member #224,590
August 25, 2022
20 Posts
Offline

Aug 28, 2023, 11:50 pm

I'm glad that it worked out for you too!

I figured out why we're confused 😄!

It's the HOLD button.

So let's say in the 1st position I have 1 2 and 3 marked. In the 2nd position 4 and 5 marked. And in the 3rd position 2 6 and 8 marked.

1P - 1 2 3

2P - 4 5

3P - 2 6 8

HOLD 1 would mean, out of the pool of 1000 numbers, show me every result that has at least one of my check marked numbers in the correct position.

For example, if I wanted to hold the number 1 in general, then I would checkmark number 1 in all 3 positions.

But if I have it check marked ONLY in the 1st position but not in the 2nd or 3rd then I would only want to see results with the number 1 in the first position, which would be 100-199. If I have number 4 checked in the 2nd position, I would want to see every result from the pool of 1000 that has the number 4 in the middle. I have 8 checked in the 3rd position, so I would want to see every result that has an 8 at the end.

Now if I click HOLD 2, that would mean show me every result from the pool of 1000 numbers that have minimum 2 of my check marked numbers "in 2 different positions."

1P - 1 2 3

2P - 4 5

3P - 2 6 8

So that would look like 1 in 1P and 4 in 2P,

or 1 in 1P and 5 in 2P,

or 3 in 1P and 2 in 3P

Or 4 in 2P and 8 in 3P etc...

As long as there is 1 number checkmarked in 2 different positions I would want to see the result from the pool of 1000 numbers. That's what HOLD 2 would mean.

HOLD 3 would mean ONLY show me my check marked numbers "in all 3 positions."

So that would be 142, 146, 148, 152, 156, 158, 242, 246, 248, 252, 256, 258, 342, 346, 348, 352, 356, and 358. Nothing more.

It's the word HOLD that got confused. I meant HOLD 1 would show every result with ONLY 1 of my check marked numbers in any of the 3 positions. HOLD 2 would show every result of 2 of my check marked numbers in 2 different positions. So positions 1 and 2, positions 1 and 3, or positions 2 and 3. And HOLD 3 would mean show me results of ONLY check marked numbers in all 3 positions.

I hope I was able to explain it correctly by providing more detail. If it sounds like too much to change please just let me know. I appreciate the effort you put in anyway!
AboveAverage22

us
Member #224,590
August 25, 2022
20 Posts
Offline

Aug 29, 2023, 12:15 am

After looking at the Tool you made again, I don't think you would have to take down or replace anything. I feel like you could just add a HOLD 1 NUMBER button, HOLD 2 NUMBERS button, and a HOLD 3 NUMBERS button? Not sure, I could be wrong.
AboveAverage22

us
Member #224,590
August 25, 2022
20 Posts
Offline

Aug 29, 2023, 5:55 am

Another way to word it is, your 1 2 3 hold feature is applying to each position individually. I'm looking for the 1 2 3 hold feature to apply to all 3 positions. Hold 1 number in any 3 positions. Hold 2 numbers in either 12 13 or 23 positions, which is like 1 number in position 1 and 1 number in position 2 = 2 numbers. 1 number in position 1 and 1 number in position 3 = 2 numbers. 1 number in position 2 and 1 number in position 3 = 2 numbers. And for Hold 3, only checkmarked numbers in all 3 positions. Hold 1 number in position 1, 1 number in position 2, and 1 number in position 3.

Sorry if you already understood what I'm trying to say lol. I know it's slightly confusing so I just wanted to sound as clear as I could.
Mr-B 216

Ohio
United States
Member #179,976
February 15, 2017
1,283 Posts
Offline

Aug 29, 2023, 7:36 am

Quote: Originally posted by AboveAverage22 on Aug 29, 2023
Another way to word it is, your 1 2 3 hold feature is applying to each position individually. I'm looking for the 1 2 3 hold feature to apply to all 3 positions. Hold 1 number in any 3 positions. Hold 2 numbers in either 12 13 or 23 positions, which is like 1 number in position 1 and 1 number in position 2 = 2 numbers. 1 number in position 1 and 1 number in position 3 = 2 numbers. 1 number in position 2 and 1 number in position 3 = 2 numbers. And for Hold 3, only checkmarked numbers in all 3 positions. Hold 1 number in position 1, 1 number in position 2, and 1 number in position 3.

Sorry if you already understood what I'm trying to say lol. I know it's slightly confusing so I just wanted to sound as clear as I could.

Ok, you are correct. I misunderstood your use of the Hold buttons. I will fix that and let you know when it's ready to test.

What goes around comes around.
AboveAverage22

us
Member #224,590
August 25, 2022
20 Posts
Offline

Aug 29, 2023, 8:05 am

I really appreciate you putting time in when you don't have to! In return I will definitely share my systems with you if you're interested! Thank you again :)
Mr-B 216

Ohio
United States
Member #179,976
February 15, 2017
1,283 Posts
Offline

Aug 29, 2023, 10:11 am

See if this is any closer to what you are looking for. It should indicate v1.2 in the upper left area of the title bar.

What goes around comes around.

New Topic New Poll

Subscribe to this topic

Pick 3 Reduction System with HOLD featurePrev TopicNext Topic

Pick 3 Reduction System with HOLD featurePrev Topic Next Topic