Made 5 sills today. Put one coat of poly on.
Spent a fair amount of time on kitchen door to laundry. Had to reshim the jamb side that I mentioned in an earlier blog. Whoever set the door before did not mortise in the keepers on the jamb. Had to do that.
Now I have the same reveal of about 3/16" between the door and jamb. Went to lumber yard and got a new slip on door sweep and installed that. Wanted the door sweep on the door so the sill would not be as high. Trip on em you know. The new sill only is about 1/2" above floor now.

Hey I am really interested in this new code I did.
What a code system is like I have it are wheels. The difference in a code wheel and a regular wheel is that you do not use the numbers that are a code digit as a pair up.
example: you have a wheel by position here which will create 12 plays using 7 numbers.
you see the code 5 here so the prs 57-59-79 will not appear in the list of 12 numbers. The same goes for the 13 and 68 pr

If you used a double code 5 in your code combo number then you will see the 55-77-99-57-59-79 prs in your list of numbers.

______p1__p2__p3
code #1___5____6
________________
lot #__1___5____6
lot #__3___7____8
lot #______9_____