Welcome Guest
Log In | Register )
You last visited December 9, 2016, 6:13 pm
All times shown are
Eastern Time (GMT-5:00)

History repeats itself P-3

Topic closed. 310 replies. Last post 4 years ago by onlymoney.

Page 16 of 21
4.813
PrintE-mailLink
Avatar
Florida
United States
Member #66575
October 30, 2008
3549 Posts
Offline
Posted: August 7, 2012, 8:45 pm - IP Logged

2 quick ? how do u combined and do u combined for the follower section 

 

 

thanks CG your the best

Thank You donn94

I am far from the best but I do try .

But this one seems to be a challenge to say the least  .

It works for sure, but you have to have a way to narrow it down

and it seems to be giving a lot of people trouble and I cant figure out why .

You asked about the combined draws.  I got them from Lotsoft Pro . It lets you down load them

Dont think Lottery Post will give you a combined history

 

Carlig

    Avatar
    Florida
    United States
    Member #66575
    October 30, 2008
    3549 Posts
    Offline
    Posted: August 7, 2012, 8:52 pm - IP Logged

    mine said compile error

    Just emailed you . I tested 5 minutes ago and it worked ..

    try it with 989  998  and  899   just to see if it works

     

    Thanks

      Avatar
      Florida
      United States
      Member #66575
      October 30, 2008
      3549 Posts
      Offline
      Posted: August 7, 2012, 8:59 pm - IP Logged

      This is one I did for Florida

      You can see tonights 664

      was here twice

      288-506-379-734-879 --- 027-773-734-879
      288-923-810-646-572 --- 765-853-646-572
      288-874-401-158-161 --- 130-082-158-161

        retxx's avatar - mrthumbs
        BOSTON
        United States
        Member #48
        September 9, 2001
        3594 Posts
        Offline
        Posted: August 7, 2012, 9:14 pm - IP Logged

        same error compile error. can someone point to where enable macros is. I cannot find it. Thanks carli is really trying hard help us with this download.

          donn94's avatar - Lottery-065.jpg
          danville,va
          United States
          Member #122105
          January 24, 2012
          716 Posts
          Offline
          Posted: August 7, 2012, 9:48 pm - IP Logged

          Thank You donn94

          I am far from the best but I do try .

          But this one seems to be a challenge to say the least  .

          It works for sure, but you have to have a way to narrow it down

          and it seems to be giving a lot of people trouble and I cant figure out why .

          You asked about the combined draws.  I got them from Lotsoft Pro . It lets you down load them

          Dont think Lottery Post will give you a combined history

           

          Carlig

          thanks im using lotsoft i think i got something going well i hope will post if it work

           

          an you are the best for all the program u make for laker an all of us to use so thanks

            Avatar
            Florida
            United States
            Member #66575
            October 30, 2008
            3549 Posts
            Offline
            Posted: August 7, 2012, 9:52 pm - IP Logged

            thanks im using lotsoft i think i got something going well i hope will post if it work

             

            an you are the best for all the program u make for laker an all of us to use so thanks

            Yes, Please let us know if you get anything figured out.

            We are all here for the same reason .. Trying to figure out / Beat this dang game lol

             

            Carlig

              Avatar
              Florida
              United States
              Member #66575
              October 30, 2008
              3549 Posts
              Offline
              Posted: August 7, 2012, 9:54 pm - IP Logged

              same error compile error. can someone point to where enable macros is. I cannot find it. Thanks carli is really trying hard help us with this download.

              Retxx, do you have Excel 2007  or 2010  ??

              Try going to the "Trust Center"  in excel options.

              You should be able to check there whether the macro's are enabled or not

               

              CG

                Avatar
                Florida
                United States
                Member #66575
                October 30, 2008
                3549 Posts
                Offline
                Posted: August 7, 2012, 10:28 pm - IP Logged

                Retxx, do you have Excel 2007  or 2010  ??

                Try going to the "Trust Center"  in excel options.

                You should be able to check there whether the macro's are enabled or not

                 

                CG

                RETXX

                Here was your tonights hits

                seems your hits are on left sde which cuts it down a lot

                Massachusetts   5780  tonight

                183-795-524-889-767 --- 326-019-889-767
                183-324-442-722-979 --- 127-903-722-979
                183-712-186-735-725 --- 360-622-735-725
                183-610-506-851-078 --- 998-198-851-078
                183-425-069-070-156 --- 093-287-070-156
                183-120-479-342-785 --- 335-796-342-785
                183-913-021-092-287 --- 904-485-092-287
                183-138-473-645-879 --- 212-970-645-879

                  retxx's avatar - mrthumbs
                  BOSTON
                  United States
                  Member #48
                  September 9, 2001
                  3594 Posts
                  Offline
                  Posted: August 8, 2012, 11:02 am - IP Logged

                  so far i have excel 2000 macro is enabled pop up says compile error- argument not found
                  can some help with this? thanks carli

                    Avatar
                    Florida
                    United States
                    Member #66575
                    October 30, 2008
                    3549 Posts
                    Offline
                    Posted: August 8, 2012, 11:27 am - IP Logged

                    so far i have excel 2000 macro is enabled pop up says compile error- argument not found
                    can some help with this? thanks carli

                    Check your email

                    Sent you new version with some changes

                    Should work okay now, hopefully

                     

                    CG

                      retxx's avatar - mrthumbs
                      BOSTON
                      United States
                      Member #48
                      September 9, 2001
                      3594 Posts
                      Offline
                      Posted: August 8, 2012, 11:47 am - IP Logged

                      carli i downloaded it saw the numbers on the right side the 578 etc. something wierd. You said to enter my numbers in the colored # 1 or 2 etc. I put the cursor on # 1 to enter a number. guess what popup  compile error argument not found. Am i doing something wrong?

                        Avatar
                        Florida
                        United States
                        Member #66575
                        October 30, 2008
                        3549 Posts
                        Offline
                        Posted: August 8, 2012, 12:05 pm - IP Logged

                        carli i downloaded it saw the numbers on the right side the 578 etc. something wierd. You said to enter my numbers in the colored # 1 or 2 etc. I put the cursor on # 1 to enter a number. guess what popup  compile error argument not found. Am i doing something wrong?

                        You have got to be kidding  lol

                        The fixes worked for three other people.

                        tell me what combo / number you are entering 

                        Oh you said you didnt get that far mmmmmmmmmmm

                        okay, right click on the colored box  draw 1 and go down to assign macro and see if it says its assigned to Draw One

                          Avatar
                          Florida
                          United States
                          Member #66575
                          October 30, 2008
                          3549 Posts
                          Offline
                          Posted: August 8, 2012, 12:07 pm - IP Logged

                          You have got to be kidding  lol

                          The fixes worked for three other people.

                          tell me what combo / number you are entering 

                          Oh you said you didnt get that far mmmmmmmmmmm

                          okay, right click on the colored box  draw 1 and go down to assign macro and see if it says its assigned to Draw One

                          Also try this

                          Go to developer tab

                          Over on the left at the top in ribbon, you see "Macros"  Click that

                          Choose "Draw one "

                          now enter whatever combo and see if it works that way

                          Carlig

                            retxx's avatar - mrthumbs
                            BOSTON
                            United States
                            Member #48
                            September 9, 2001
                            3594 Posts
                            Offline
                            Posted: August 8, 2012, 1:20 pm - IP Logged

                            I do not see any developer tab at all

                              retxx's avatar - mrthumbs
                              BOSTON
                              United States
                              Member #48
                              September 9, 2001
                              3594 Posts
                              Offline
                              Posted: August 8, 2012, 1:21 pm - IP Logged

                              boy is this frustrating carli. Keep trying hopefully we will get it. any body else want to jump in feel free.

                                 
                                Page 16 of 21