Text entry added :
1. Include Box Pairs(Touching Pairs Only) Only Present Here
2. Include Box Pairs(Touching Pairs Only) Only If at least One Of Present Here
These allow you to control which box pairs will show up.
Straight pairs filters : New button group with Ascending, Descending and Equal pairs select/deselect added. This way user can filter 12,21 and 11.
Pairs filters : button groups colored with alternating colors to show them that they belong to a different groups.
Defect:
Text boxes with check boxes were not working. Now they are fixed as part of this release.
The text fields give an option to bring in combos and pairs from other programs.
Include/Exclude draw data filters render colored grids:
User can filter out straight digits (straight combo positional), box digits (box combo positional), straight pairs (positional straight pairs - all possible not touch only), box pairs (positional box pairs from box combo - all possible not touch only), straight combos and box combos. They can also include them similar to exclusion (Inclusion means exclude everything other than what’s included – exclusion precedes over inclusion). If something is already excluded then an inclusion won’t add it back. The period slider lets user choose the period. User can mix match include/exclude as long as they don't overlap and mess up/exclude everything. It be better to find sweet spot of 2 or 3 of these by experimenting with the statistics tables.
Straight Pairs split as IN/OUT, LOW/HIGH using new way of having 1/2 and 1/4 split logic (00-99: box pairs - total 55): 00-14,57-99(OUT), 15-56(IN), 00-33(LOW), 34-99(HIGH)
Not an equal split (total pairs in each group member In/OUT - LOW/HIGH):
IN : 28
OUT: 27
LOW : 28
HIGH : 27
Note that in most tools only the straight pairs are used to group pairs as IN/OUT, LOW/HIGH. This is a new way to get one more way to exclude/include pairs(box pairs).
New number grouping in patterns and filters.
Natural split: 0,1,2: 0-9 digits spread across
NS3 – 1: 0, 3, 6, 9
NS3 – 2: 1, 4, 7
NS3 – 3: 2, 5, 8
Statistics:
Digits back and combos back statistics. These let user to see on a particular day how far back the digit/combo matched(positional). This data can be used to choose the Include/Exclude filter choices for digits/pairs and combos.
When you choose the period slider in statistics section in draw data tab, draw data is cut down to that period. So, for the draws in the very end, the repeats data will show as -1 as there won’t be enough period to go back and lookup. Play around with the filters, values and find what fits your need.
General:
Now content in each individual data table column can be searched. There is a text box at the end of the table for each column. Note these are not exact match but the text would matched anywhere in the column. I will add dropdown match/filter for some columns in future release.
Shows page length choice: User can choose number of rows for each table. Note the generic grid length is still used and it would be the default value used for all data tables.
United States
Member #173,010
February 13, 2016
1,629 Posts
Offline
Quote: Originally posted by dr san on Aug 12, 2021
hello TAMI make wheels with filters on pick 3 and 4 from previous draws up to 600 draws not repeating at least the three digits ex
on the wheel generated 458, but this 458 has already been drawn in the list of 600 previous draws so exclude 458,
then find a way to create the veen chart because the chart avoids conflicts in the filters, positional filters is a good way you are doing, great job, control of repeating patterns
positional = even / odd low / high ( 0 to 9) cntrol the frequency of these 4 patterns in each position,
Positional digit/pair/combo - box/straight exclusion/inclusion are available as filters. Use and let me know.
No plans of adding other formats. This would be one time effort from people to get their draws in the requested format. We can introduce one or two formats in the future. This tool still is in progress with lot more filters and statistics yet to be added.
Copy and paste the draws in the above format. You can change the date format in your input with any of those 4 types + any date separator.
M,D,E,N is the order of draws.
For a day : M occurs before D occurs before E occurs before N.
As of now users have to filter out M, E and combined before using here.
To run the tool, more information is available in the same thread. It is working for few others from the time it was shared. It would be repeated typing/internal linking - not that I don't want to type but it's repetitive information.
Try and let me know. If you feel something would ennhace the tool, let me know.
If there are any defects, bugs or problems in running, please post them here.
bgonçalves Brasil
Member #92,560
June 9, 2010
3,781 Posts
Offline
hello, thamy can you put this feature on? it is the repetition in each position of at least one of these patterns! attention is not repetition of the digit, but of the pattern
high = 5,6,7,8,9
low 0.1,2,3,4
par=0,2,4,6,9
odd = 1,3,5,7.9
just this 4 patterns helps a lot
example
last draw pick 3 was
478= last
152 = 1st position repeated the low pattern
in the 2nd position he repeated odd and in the 3rd position he repeated
the standard pair
let's represent the patterns in numbers
par= 01
odd = 02
high = 03
low = 04
there are 64 patterns in 100%
so in the example
478
152 we have the sequence = 04.02.01
then we have the repeated sequence of the last 478
repeated the pattern of the last one in the three positions
then the feature will filter not by repeated digits, but by 4 patterns in each position
United States
Member #173,010
February 13, 2016
1,629 Posts
Offline
Quote: Originally posted by dr san on Sep 8, 2021
hello, thamy can you put this feature on? it is the repetition in each position of at least one of these patterns! attention is not repetition of the digit, but of the pattern
high = 5,6,7,8,9
low 0.1,2,3,4
par=0,2,4,6,9
odd = 1,3,5,7.9
just this 4 patterns helps a lot
example
last draw pick 3 was
478= last
152 = 1st position repeated the low pattern
in the 2nd position he repeated odd and in the 3rd position he repeated
the standard pair
let's represent the patterns in numbers
par= 01
odd = 02
high = 03
low = 04
there are 64 patterns in 100%
so in the example
478
152 we have the sequence = 04.02.01
then we have the repeated sequence of the last 478
repeated the pattern of the last one in the three positions
then the feature will filter not by repeated digits, but by 4 patterns in each position
I am adding more common analysis, statistics and filters.
I will add more filter rules using draw history but not standalone systems that take more analysis on their own.
Adding too much complexity makes the tool complex from usability perspective and users won't prefer it.
United States
Member #173,010
February 13, 2016
1,629 Posts
Offline
Quote: Originally posted by dr san on Sep 8, 2021
hello, thamy can you put this feature on? it is the repetition in each position of at least one of these patterns! attention is not repetition of the digit, but of the pattern
high = 5,6,7,8,9
low 0.1,2,3,4
par=0,2,4,6,9
odd = 1,3,5,7.9
just this 4 patterns helps a lot
example
last draw pick 3 was
478= last
152 = 1st position repeated the low pattern
in the 2nd position he repeated odd and in the 3rd position he repeated
the standard pair
let's represent the patterns in numbers
par= 01
odd = 02
high = 03
low = 04
there are 64 patterns in 100%
so in the example
478
152 we have the sequence = 04.02.01
then we have the repeated sequence of the last 478
repeated the pattern of the last one in the three positions
then the feature will filter not by repeated digits, but by 4 patterns in each position
I would prefer that You make use of the include/exclude box/straight digit/pair and combo - draw filters.
Also these have corresponding statistics.
Use them and let me know whether they are helpful in filtering. You can attach some screenshots.
Include/Exclude draw data filters render colored grids:
User can filter out straight digits (straight combo positional), box digits (box combo positional), straight pairs (positional straight pairs - all possible not touch only), box pairs (positional box pairs from box combo - all possible not touch only), straight combos and box combos. They can also include them similar to exclusion (Inclusion means exclude everything other than what’s included – exclusion precedes over inclusion). If something is already excluded then an inclusion won’t add it back. The period slider lets user choose the period. User can mix match include/exclude as long as they don't overlap and mess up/exclude everything. It be better to find sweet spot of 2 or 3 of these by experimenting with the statistics tables.
Straight Pairs split as IN/OUT, LOW/HIGH using new way of having 1/2 and 1/4 split logic (00-99: box pairs - total 55): 00-14,57-99(OUT), 15-56(IN), 00-33(LOW), 34-99(HIGH)
Not an equal split (total pairs in each group member In/OUT - LOW/HIGH):
IN : 28
OUT: 27
LOW : 28
HIGH : 27
Note that in most tools only the straight pairs are used to group pairs as IN/OUT, LOW/HIGH. This is a new way to get one more way to exclude/include pairs(box pairs).
New number grouping in patterns and filters.
Natural split: 0,1,2: 0-9 digits spread across
NS3 – 1: 0, 3, 6, 9
NS3 – 2: 1, 4, 7
NS3 – 3: 2, 5, 8
Statistics:
Digits back and combos back statistics. These let user to see on a particular day how far back the digit/combo matched(positional). This data can be used to choose the Include/Exclude filter choices for digits/pairs and combos.
When you choose the period slider in statistics section in draw data tab, draw data is cut down to that period. So, for the draws in the very end, the repeats data will show as -1 as there won’t be enough period to go back and lookup. Play around with the filters, values and find what fits your need.
General:
Now content in each individual data table column can be searched. There is a text box at the end of the table for each column. Note these are not exact match but the text would matched anywhere in the column. I will add dropdown match/filter for some columns in future release.
Shows page length choice: User can choose number of rows for each table. Note the generic grid length is still used and it would be the default value used for all data tables.