Free Program - Pick 3 wheeling-enginePrev Topic Next Topic

New Topic New Poll

LANTERN

Tx
United States
Member #4,570
May 4, 2004
5,180 Posts
Offline

Apr 7, 2006, 4:59 pm

Quote: Originally posted by CalifDude on April 7, 2006
Quote: Originally posted by LANTERN on April 7, 2006
Highest-Lowest for doubles.
044 LHH
440 HLL
404 HLH
3 Patterns for doubles each hold 90 straight combos.
You consider zero as a low number ... I agree ... but 4 is a high number?????? I have never seen that before. What are your low digits and your high digits?
Also, how is 440 a HLL??
I am sure I am missing something here!!

CD Not Low and or High, but Lower than and Higher than.
4 = Higher than 0 and 0 = Lower than 4.
LANTERN

Tx
United States
Member #4,570
May 4, 2004
5,180 Posts
Offline

Apr 7, 2006, 5:05 pm

But i did make a mistake, doubles are 3 way combos, but OVERALL in a way they also are 6 way combos such as these:
044 LHH
440 HHL
404 HLH
And:
400 HLL
004 LLH
040 LHL
So there are 6 patterns for doubles also, 3 for Half (135) of the doubles and 3 for the other half (135) of them. For a total of 270 straight doubles.
LANTERN

Tx
United States
Member #4,570
May 4, 2004
5,180 Posts
Offline

Apr 7, 2006, 5:08 pm

The filter is the Lower than-Medium-Higher than.
They are in relation to which of them Higher than and which-one is Lower than and which is Medium or in between the Highest and the Lowest of them.
They are relative terms.
LANTERN

Tx
United States
Member #4,570
May 4, 2004
5,180 Posts
Offline

Apr 7, 2006, 5:10 pm

So for doubles each of the six patterns filters out only 45 straight double combos, while each of the singles patterns filters out 120 singles straight combos.
LANTERN

Tx
United States
Member #4,570
May 4, 2004
5,180 Posts
Offline

Apr 7, 2006, 5:15 pm

CD as you know these are just some very good filters among a legion of them, there are many ways or dimentions in which filters can be used, many of them are on a sort of mixed or compound filtering, of which I have said very little so far, but I won't talk about that here at this time.
You might say that there are filters within filters sort of or kind of.
LANTERN

Tx
United States
Member #4,570
May 4, 2004
5,180 Posts
Offline

Apr 7, 2006, 5:28 pm

Take the 382 Low-High-Low or LHL most people use this filter pattern in only this way, I have discovered other ways in which to use this and other filter patterns for even greater filtering and or accuracy.
There are no less than 4 ways perhaps in which this particular filter pattern can be used as an exclude filter. The known way and 3 more ways maybe even more than 3.
Of course not all of them ways are to be used at the very same time, only the one or ones that will work best at the particular time as suggested by the past draws.
sfilippo

Oklahoma
United States
Member #33,769
February 24, 2006
3,146 Posts
Offline

Apr 7, 2006, 5:47 pm

Hey paurths,

Thanks for the free program. I'm sure it's going to come in very handy!

Steve
truecritic

Michigan
United States
Member #22,394
September 24, 2005
1,583 Posts
Offline

Apr 7, 2006, 10:02 pm

Good work, Ricky!
I particularly like the positional choices and the inclusion of doubles/triples.
DIAMOND RAY

STONE MOUNTAIN GA.
United States
Member #6,120
August 7, 2004
175 Posts
Offline

Apr 7, 2006, 10:48 pm

Can anyone tell how I can build a lottery program or where to go to start I think I have a plan ????
BobP

Dump Water Florida
United States
Member #380
June 5, 2002
3,576 Posts
Offline

Apr 8, 2006, 1:25 am

Quote: Originally posted by DIAMOND RAY on April 7, 2006
Can anyone tell how I can build a lottery program or where to go to start I think I have a plan ????
All software can do is automate a process you are already doing. For example a workout that takes you all day could be done in seconds if you can provide the percise steps you take to get to the result that wins often enough to keep you in profit.

Otherwise if you make choices at various stages the software will just be another tool for people to try to get lucky with.

I went through this a couple of times and eventually found software that was already doing what I thought would prove productive and it turned out to be just another hit or miss system no better then probability.

Another problem is making yourself understood. No matter how you explain what you want, what you get is always "improved" to the point of being something else.

The way to go would be to find a current lottery software that has most of the features you'd want to work with and try and convince the author to add your method.

I suggest you visit http://www.lotto-logix.com and work your way through the software listings to see if your idea is already out there. If not there are also links to places authors put up software demos of new creations like tu cows, etc. Establish a relationship with a software author by buying a copy and then asking for an addition, even if you try this and fail a couple of times it's cheaper then paying a programmer who isn't lotto experienced.

BobP
paurths

Switching between Fairfax, VA and Belgium
Belgium
Member #19,286
July 29, 2005
2,254 Posts
Offline

Apr 8, 2006, 3:20 am

one can also tryout LotSoft, the full program in which this wheeling engine is included (and soon a much bigger one), too...
paurths

Switching between Fairfax, VA and Belgium
Belgium
Member #19,286
July 29, 2005
2,254 Posts
Offline

Apr 8, 2006, 3:45 pm

Hi, for anyone who might be interested, there now also is a free wheeling engine for pick4 available: https://www.lotterypost.com/thread/132128
Grtz,
Ricky
paurths

Switching between Fairfax, VA and Belgium
Belgium
Member #19,286
July 29, 2005
2,254 Posts
Offline

Apr 8, 2006, 5:57 pm

New version which includes a "Width"-filter is now available for download: 696

New Topic New Poll

Subscribe to this topic

Free Program - Pick 3 wheeling-enginePrev TopicNext Topic

Free Program - Pick 3 wheeling-enginePrev Topic Next Topic