DG Filters For Dummies
OK I'll try to explain in laymens terms what each filter means. Some of them are pretty simple to understand.
O-D (Odd Digit) - This is the total number of ODD Digits from the drawing. For example, today NJ Midday drawing was 9-4-4. So the 9 was the only Odd digit so the filter value would be a 1. The filter setting range from 0 through 3.
E-O (Even to Odd) - This is if the 1st position is an Even Digit drawn and the 2nd Position is an Odd digit drawn. For example, today NJ Midday drawing was 9-4-4. The 1st digit is a 9 which is Odd and the 2nd position digit was a 4 which is Even. The filter value would be a 0. The filter setting range is either a 0 or a 1.
O-E (Odd to Even) - This is if the 1st position is an Odd Digit drawn and the 2nd Position is an Even digit drawn. For example, today NJ Midday drawing was 9-4-4. The 1st digit is a 9 which is Odd and the 2nd position digit was a 4 which is Even. The filter value would be a 1 since 9 = Odd and 4 = Even. The filter setting range is either a 0 or a 1.
O-F (Odd Front Pair) - This is if the 1st position is an Odd Digit drawn and the 2nd Position is Odd digit drawn making an Odd Front Pair. For example, today NJ Midday drawing was 9-4-4. The 1st digit is a 9 which is Odd and the 2nd position digit was a 4 which is Even. The filter value would be a 0 since 9 = Odd and 4 = Even. The filter setting range is either a 0 or a 1.
C-D (Consecutive Digits Front Pair - Consecutive Digits Back Pair) - This is if the Front Pair is a 01, 12, 23, 34, 45, 56, 67, 89 and also the Back Pair is a 01, 12, 23, 34, 45, 56, 67, 89. The filter setting range is either a 0,1 or 2. If the Front Pair was a 23 and Back Pair was a 34 the filter value would be 2 since the 23 and 34 are both consecutive Pairs.
I'll explain the remainder later this evening.
Hope I explained these correctly.